How to Improve Benefits of Raymond Mill Significantly?

Raymond mill, which is one kind of grinding mills, is widely used for grinding calcium carbonate, gypsum powder, power plant desulfurization, non-metallic mineral powder, pulverized coal preparation industry and suitable for various non-flammable mineral ores, of which mohs hardness is not greater than 7 grade and humidity is below 6%, such as limestone, calcite, barite, talc, calcium carbonate, dolomite, gypsum, diabase, quartzite and bentonite. Since we have talked about the problems of traditional Raymond mill, we need to innovate this grinding mills, but do you know how?

According to the years of ultrafine powder equipment processing technology, the above issue has carried on the thorough technical innovation.Found when using traditional Raymond mill, Raymond mill in processing calcite mineral powder, 325 mesh ores contain a large number of 10 um ultrafine mineral powder, if it can be separated and expand production, will greatly improve efficiency. Therefore a lot of upgrading structure of Raymond mill: Host traditional way for the improvement of the main shaft and the discussion of the plum blossom is innovated, structure of stabilising its smooth operation.

What's more, adopts the above new Raymond mill of calcite, dolomite, talc, old earth, barite, rutile, fluorspar etc. Nonmetal mineral ultrafine grinding. Checked by practice, selection of grinding feed size is 25 mm of calcite, to adjust to when the fineness of 1250 mesh (10 um), the yield can reach 450 kg/h, and the input power only need 23 kw. Than traditional Raymond mill has a significantly higher cost performance.

And we also have other mining machines, such as fly ash dryer, impact crusher and sand maker and so on. If you have any other question or have an interest on our product ,you can write to us:

grinding rod mill:

fly ash dryer:
sand maker:...