For MAIZE MILLING MACHINE, the good functioning of the device is the necessary guarantee to increase production and improve efficiency. Furthermore, to ensure the smooth functioning of the maize milling machine, the premise is motor regular work.
voltage imbalance, single-phase operation, winding open circuit failure or breakdown, poor starting and acceleration performance, etc. would cause the motor fault. There is scorched flavor and stink in motor. Motor overheating, winding burning, single-phase operation, winding failure, bearing failure, etc. will lead to the scorched flavor. Treatment measures: take timely remedial measures for problems found in the inspection，also by the maintenance cycle of the motor fasten screw and wiring, inspection, clean and maintain the motor and so on.
What’s more, if factory operator find maize milling machine is working properly, but the quality of the product decline, it means the roller gap needs to be adjusted. You can compress the spring to ensure both ends of the roller same. It is also maybe because that the grinding using time is too long, and severely worn. When you find maize milling machine yield is relatively small or no powder out, it may be because the screen was blocked. If the produced maize flour temperature is relatively high, what we should to do is to adjust the roller gap. If it is the cause of damaged roller, prompt repairing or replacement are required. In summer, pay attention to maize milling machine heat dissipation.
After doing this, the maize milling machine can be relatively prolonged. Of course, not only in summer day, the maintenance should always be carried out. Only by this method, can the maize milling machine in a good condition to product.
Welcome to visit our factory and official website: http://www.maize-milling-machine.com for more information, or contact us via firstname.lastname@example.org .