Hjhjhhj

DENABY EMERGENCY PROCEDURES – FAILURE OF
LIGHTING

      1     INTRODUCTION
              2     HAZARDS
              3   TRAINING REQUIRED
              4   PERSONS AT RISK
              5   PPE REQUIREMENTS
              6   GENERAL CONTROL MEASURES
              7     JOB INSTRUCTION
     

DENABY EMERGENCY PROCEDURES – FAILURE OF
        LIGHTING
INTRODUCTION
The following Safe System of Work forms part of the Risk Assessments for the site and must be followed at all times. Any work undertaken outside of the Safe System of Work must be reported to the site Supervisor or Manager immediately to enable the appropriate action to be taken

  2 HAZARDS
. Pedestrian access and egress
. Plant Vehicle movement
. Slips Trips and Falls
. Poor Housekeeping
. Fire and or Explosion
. Manual Handling

  3 TRAINING REQUIREMENTS
. Manual Handling
. Fire evacuation procedures
. Completed site Induction
. Specific Safe System of Work
. Accident/Incident training

  4 PERSONS AT RISK
. Sita Employees
. Contractors
. Pedestrians
. Visitors

DENABY EMERGENCY PROCEDURES – FAILURE OF
LIGHTING

  5 PPE REQUIREMENTS STANDARD
. High Visibility Jacket
. Safety Boots
. Hard Hat
. Gloves
. Ear Defenders
. Protective Clothing

  6 GENERAL CONTROL MEASURES
. Only those trained and authorized may carry out this task
. Site rules must be adhered to at all times
. Site induction must have been completed
. The above training requirements must be met
. The above PPE must be worn and the correct PPE is worn for the correct spillage you are dealing with.
. Do not climb onto or over any conveyors
. Do not use mobile phones whilst operating plant or machinery
. Do not use personal stereos, iPods etc in operational areas and whilst operating mobile plant – you must remain aware of your surroundings and alert to hazards.
. Seat belts must be worn
. Ensure when dealing with spillages that the area is clear of site users...