Factory Direcetly Supply of High Efficient Charcoal Briquetting Machine
- Submitted by: sophie01
- Views: 324
- Category: Science
- Date Submitted: 10/15/2014 10:49 PM
- Pages: 2
- Report this Essay
The method of charcoal production generates a significant amount of smoke. In fact, changes in the color of the smoke signal transitions to different stages of the process. Initially, its whitish hue indicates the presence of steam, as water vapors are driven out of the wood. Briquetting is a process that biomass is compressed under high pressure and high temperature by charcoal briquetting machine. The self bonding of biomass to form a briquette involves the thermo-plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature.
Lignin serves as the glue in the briquetting process, thus binding, compressing the biomass to form into high density briquettes. During this process, no binder needs to be used. So the output briquette made by charcoal briquetting machine is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. From the storage silo, the material is fed into the molding machine hopper of charcoal briquetting machine evenly by the quantitative device. Then the regulation board on the hopper make the materal evenly enter into the middle of the roller; the reverse operating roller compress the material and the forming pressure increases gradually, at the centerline of the roll the forming pressure reaches its maximum value, once the material through the line, the molding pressure rapidly decrease so that the material forms into ball shape and smoothly discharge the ball. This is certainly proved for one industrial system, the multiple hearth rotary furnace. However, it is always necessary to ask if the new material can be 'successfully carbonised'. Many proposals have come to grief when this test has been applied. Nevertheless bark and sawdust and certain agricultural residues can be successfully carbonised now. But it is essential to ask before setting out to carbonise agricultural residues whether from all points of view this is the best use for them...
Lignin serves as the glue in the briquetting process, thus binding, compressing the biomass to form into high density briquettes. During this process, no binder needs to be used. So the output briquette made by charcoal briquetting machine is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. From the storage silo, the material is fed into the molding machine hopper of charcoal briquetting machine evenly by the quantitative device. Then the regulation board on the hopper make the materal evenly enter into the middle of the roller; the reverse operating roller compress the material and the forming pressure increases gradually, at the centerline of the roll the forming pressure reaches its maximum value, once the material through the line, the molding pressure rapidly decrease so that the material forms into ball shape and smoothly discharge the ball. This is certainly proved for one industrial system, the multiple hearth rotary furnace. However, it is always necessary to ask if the new material can be 'successfully carbonised'. Many proposals have come to grief when this test has been applied. Nevertheless bark and sawdust and certain agricultural residues can be successfully carbonised now. But it is essential to ask before setting out to carbonise agricultural residues whether from all points of view this is the best use for them...