Know Common Things About Raw Iron Filings Dryer
- Submitted by: cherryhong
- Views: 172
- Category: English: Novels
- Date Submitted: 11/25/2014 10:40 PM
- Pages: 2
- Report this Essay
Rotary drum dryer is mainly used in mineral processing, building materials, metallurgy, chemical industry drying certain humidity or granularity of the material.Rotary drum dryer has strong adaptability of materials that can dry various materials, and equipment operation is simple and reliable, it has been widely used.
The drum of raw iron filings dryer or iron oxide red dryer is slightly inclined cylinder can rotate, and the heat source for drying materials generally are high temperature flue gas, hot air and so on, the heat source can also be chosen according to the nature, quality requirements and other specific of materials.
Raw iron filings dryer heat is from the combustion device. This dryer equipment uses downstream heating mode. Hence it needs raw materials to go through the feed tank, the feed chute into the cylinder, then pushed back by the spiral plate. Since the dryer machine tilted, while the material flows to the back-end under the role of gravity and rotation, on the other hand material is repeatedly raise by lifting plate, to the top and down, so that the material in the barrel to form a uniform curtain barrel full of hot air for heat exchange due to repeated lifting material, water in materials is gradually dried, so as to achieve the purpose of drying.
Fote rotary dryer new type of lifting plate device, with a guide, average current, lifting and many other features make the material in the dryer full uniform radial cross-section, showing a thin,uniform,full material state , then it makes materials fully contact with the hot gas stream to make full use of thermal energy purposes. Our rotary dryer uses reasonable operating parameters, coal consumption and electricity consumption lower than the average dryer than 10-15%, while production increased more than 10-15%,it has been widely applied in the cement and mineral processing companies. Welcome to visit and purchase: info@sinoftm.com.
lignite coal dryer:...
The drum of raw iron filings dryer or iron oxide red dryer is slightly inclined cylinder can rotate, and the heat source for drying materials generally are high temperature flue gas, hot air and so on, the heat source can also be chosen according to the nature, quality requirements and other specific of materials.
Raw iron filings dryer heat is from the combustion device. This dryer equipment uses downstream heating mode. Hence it needs raw materials to go through the feed tank, the feed chute into the cylinder, then pushed back by the spiral plate. Since the dryer machine tilted, while the material flows to the back-end under the role of gravity and rotation, on the other hand material is repeatedly raise by lifting plate, to the top and down, so that the material in the barrel to form a uniform curtain barrel full of hot air for heat exchange due to repeated lifting material, water in materials is gradually dried, so as to achieve the purpose of drying.
Fote rotary dryer new type of lifting plate device, with a guide, average current, lifting and many other features make the material in the dryer full uniform radial cross-section, showing a thin,uniform,full material state , then it makes materials fully contact with the hot gas stream to make full use of thermal energy purposes. Our rotary dryer uses reasonable operating parameters, coal consumption and electricity consumption lower than the average dryer than 10-15%, while production increased more than 10-15%,it has been widely applied in the cement and mineral processing companies. Welcome to visit and purchase: info@sinoftm.com.
lignite coal dryer:...