Analysis of Concrete Crusher

crusher tooth Detailed stress analysis of specific   crushing teeth mesh static method is an effective method of stress analysis fractionation crusher teeth at maximum load may be subject to various forms of analysis. In breaking tooth stress analysis, used physical parameters.   crushing teeth physical parameters elastic modulus / (Nmm-2) Poisson's ratio mass density / (kgm-3) yield strength /(MPam-2)2130000.286787012152 broken tooth load modeling at different stages in the process of crushing, crushing teeth the surface of each play a different role. In the material biting stage, mainly the first surface to the top edge of broken teeth and broken teeth adjacent to the top surface of the contact material, this time local contact materials and broken teeth top surface in contact with the top surface of the front edge of the broken tooth Manufacturers Of Sand Crushers. After the material bite, broken teeth adjacent top, side, front and back surfaces of the blade is formed by the space, which has a chance to surface material under pressure generated by the reaction, this time with the whole surface of the contact material, or only with these local contact surfaces. Thus, when respectively top, front, back and side load simulation, stress distribution study different facets loading stress distribution, the study suffered broken teeth in all directions at maximum load. Class 8 simulation loading.   finite element analysis results broken tooth stress distribution is top loading, from which can be seen, the maximum stress appears in front of the center of the tooth root, the maximum stress value of 325MPa, below the material allowable stress values. Addendum is broken blade loading stress distribution, the maximum stress appears on the broken edge and a maximum of 113MPa. Visible at the same intensity load, when the use of broken blades were broken, can reduce the overall maximum stress broken teeth. Compare and top edge of the crushing stress that: two broken under stress...